16361A
1.INSTALL FAN AND GENERATOR V BELT
Using SST and a 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.
Be sure to connect SST and the tools so that they are in line during use.
When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
After the tensioner is fully retracted, do not apply force any more than necessary.
51217A
2.INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH
Install the reinforcement RH with the 4 bolts.
53701
3.INSTALL FRONT FENDER APRON RH
51441
4.INSTALL NO. 1 ENGINE UNDER COVER
5.INSTALL FRONT WHEEL RH
53292A
6.INSTALL UPPER RADIATOR SUPPORT SEAL