53292A
1.REMOVE UPPER RADIATOR SUPPORT SEAL
2.REMOVE FRONT WHEEL RH
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
53701
4.REMOVE FRONT FENDER APRON RH
51217A
5.REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
Remove the 4 bolts and reinforcement RH.
16361A
6.REMOVE FAN AND GENERATOR V BELT
Using SST and a 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V belt.
Be sure to connect SST and the tools so that they are in line during use.
When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
After the tensioner is fully retracted, do not apply force any more than necessary.