Home › Engine / Hybrid System › 2AZ-FE ENGINE MECHANICAL › CYLINDER HEAD
RM24M0E _51 Engine / Hybrid System _059548 2AZ-FE ENGINE MECHANICAL _0291834 CYLINDER HEAD A

2AZ-FE ENGINE MECHANICAL  CYLINDER HEAD  REPAIR  


PROCEDURE

Hide 1.REPAIR VALVE SEATS

a.
A128227E01
2.266,0.171 2.620,0.385 0.354,0.214 10 75° 2.684,0.229 3.039,0.443 0.354,0.214 10 45° 3.021,0.514 3.375,0.728 0.354,0.214 10 30° 2.85,1.524 3.284,1.693 0.434,0.170 10 Width

If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.


b.

If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.

Standard width:
Item Standard Condition
Intake 1.0 to 1.4 mm (0.0394 to 0.0551 in.)
Exhaust 1.2 to 1.6 mm (0.0472 to 0.0630 in.)



c.

Lap the valve and valve seat by hand with an abrasive compound.


d.

Recheck the valve seating position.