Home › Engine / Hybrid System › 2GR-FE COOLING › THERMOSTAT
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291843 THERMOSTAT G

2GR-FE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

a.
P013560

Inspect the thermostat.

HINT:

The valve opening temperature is inscribed on the thermostat.



b.
P000436

Immerse the thermostat in water and gradually heat the water.


c.

Check the valve opening temperature.

Valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not as specified, replace the thermostat.


d.
A091387E14
2,1.594 2.5,1.771 0.5,0.177 10 false 7.7 mm

Check the valve lift.

Valve lift:

7.7 mm (0.3031 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


e.

Check that the valve is fully closed when the thermostat is at low temperatures (below 40°C (104°F)).

If it is not fully closed, replace the thermostat.