Home › Engine / Hybrid System › 2GR-FE COOLING › COOLING FAN MOTOR
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291844 COOLING FAN MOTOR G

2GR-FE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.CHECK NO. 1 COOLING FAN MOTOR

a.
A161440

Disconnect the No. 1 fan connector.


b.

Connect the battery and an ammeter to the No. 1 fan motor connector.


c.

Check that the No. 1 fan rotates smoothly, and then check the reading on the ammeter.

Standard current:

18 to 22 A at 20°C (68°F)


HINT:

Refer to the indication mark illustration for the indication mark location.


If the result is not as specified, replace the No. 1 cooling fan motor.


d.

Reconnect the No. 1 fan motor connector.


Hide 16363A 2.CHECK NO. 2 COOLING FAN MOTOR

a.
A161441

Disconnect the No. 2 fan connector.


b.

Connect the battery and an ammeter to the No. 2 fan motor connector.


c.

Check that the No. 2 fan rotates smoothly, and then check the reading on the ammeter.

Standard current:

18 to 22 A at 20°C (68°F)


HINT:

Refer to the indication mark illustration for the indication mark location.


If the result is not as specified, replace the No. 2 cooling fan motor.


d.

Reconnect the No. 2 fan motor connector.