Home › Engine / Hybrid System › 2GR-FE COOLING › RADIATOR
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291847 RADIATOR G

2GR-FE COOLING  RADIATOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT LOCK PLATE FOR DAMAGE

a.
A132665E01
2.484,1.484 3.178,1.670 0.694,0.186 10 Lock Plate 2.852,1.105 2.852,1.468 false 2.508,0 2.869,0.186 0.361,0.186 10 Core 2.036,0.256 2.464,0.057 false

Inspect the lock plate for damage.

HINT:
·

Reassembly of a deformed tank will be impossible. Therefore, first correct the shape of the lock plate groove with pliers or a similar tool, if necessary.

·

Water leakage will result if the bottom of the lock plate groove is damaged or dented. Repair or replace the locking plate if necessary.



NOTICE:

The radiator can only be crimped 3 times. After recrimping 2 times, the radiator core must be replaced.