Home › Engine / Hybrid System › 2GR-FE COOLING › RADIATOR
RM24M0E _51 Engine / Hybrid System _059551 2GR-FE COOLING _0291847 RADIATOR N

2GR-FE COOLING  RADIATOR  ON-VEHICLE CLEANING  


PROCEDURE

Hide 16400 1.INSPECT RADIATOR ASSEMBLY

a.
A112201

Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections.

If the fins are blocked, wash them with water or a steam cleaner.


NOTICE:
·

If the distance between the steam cleaner and core is too close, the fins may be damaged.

·

Keep the following injection distance.

Standard injection distance:
Injection Pressure Specified Condition
2942 to 4903 kPa
(30 to 50 kgf/cm2, 427 to 711 psi)
300 mm (11.81 in.)
4903 to 7845 kPa
(50 to 80 kgf/cm2, 711 to 1138 psi)
500 mm (19.69 in.)


·

If the fins are bent, straighten them with a screwdriver or pliers.

·

Never apply water directly onto the electronic components.




b.

Dry the fins with compressed air.