16363A
1.INSTALL NO. 2 COOLING FAN MOTOR
Install the fan motor with the 3 screws.
Attach the No. 2 cooling fan motor connector's clamp.
16363
2.INSTALL NO. 1 COOLING FAN MOTOR
Install the fan motor with the 3 screws.
16361
3.INSTALL FAN
Install the 2 fans with the 2 nuts.
4.CHECK COOLING FAN MOTOR OPERATION
Check the No. 1 and No. 2 cooling fan motor operation.
Check that the fan rotates smoothly by hand.
Connect the battery to the fan motor connector.
Check that the fan rotates smoothly, and check the motor rotation direction.
Make sure there are no malfunction noises or vibrations while the motor is rotating.
Be careful if the positive and negative terminals of the battery are mistakenly connected to the connector in reverse, as the motor will operate in the opposite direction.