Home › Engine / Hybrid System › 2AZ-FE COOLING › RADIATOR
RM24M0E _51 Engine / Hybrid System _059552 2AZ-FE COOLING _0291853 RADIATOR N

2AZ-FE COOLING  RADIATOR  ON-VEHICLE CLEANING  


PROCEDURE

Hide 16400 1.INSPECT RADIATOR ASSEMBLY

A112201

a.

Check that the radiator and condenser are not blocked with leaves, dirt, or insects. Clean the hose connections.

If the fins are blocked, wash them with water or a steam cleaner.


NOTICE:
·

If the distance between the steam cleaner and core is too close, the fins may be damaged.

·

Keep the following injection distance.

Standard injection distance:
Injection Pressure Specified Condition
2,942 to 4,903 kPa
(30 to 50 kgf/cm2, 427 to 711 psi)
300 mm (11.81 in.)
4,903 to 7,845 kPa
(50 to 80 kgf/cm2, 711 to 1,138 psi)
500 mm (19.69 in.)


·

If the fins are bent, straighten them with a screwdriver or pliers.

·

Never apply water directly onto the electronic components.




b.

Dry the fins with compressed air.