Home › Engine / Hybrid System › 2AZ-FE COOLING › THERMOSTAT
RM24M0E _51 Engine / Hybrid System _059552 2AZ-FE COOLING _0291854 THERMOSTAT G

2AZ-FE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

P013560

HINT:

The valve opening temperature is inscribed on the thermostat.


a.
P000436

Immerse the thermostat in water, and then gradually heat the water.


b.

Check the valve opening temperature of the thermostat.

Standard valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve opening temperature is not as specified, replace the thermostat.


c.
A085445E33
2.531,1.573 3.188,1.771 0.656,0.198 10 false Valve Lift

Check the valve lift.

Standard valve lift:

10 mm (0.39 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is at low temperatures (below 77°C (171°F).

If it is not fully closed, replace the thermostat.