Home › Engine / Hybrid System › 2AZ-FE LUBRICATION › OIL PUMP
RM24M0E _51 Engine / Hybrid System _059554 2AZ-FE LUBRICATION _0291861 OIL PUMP A

2AZ-FE LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15163 1.INSTALL OIL PUMP ROTOR

a.

Coat the drive rotor and driven rotor with engine oil.


b.
B011423E14
0.583,0.167 0.896,0.531 false 0.583,0.167 0.813,0.771 false 0.583,0.167 0.792,1.094 false 0.177,0.063 0.542,0.25 0.365,0.188 10 false Mark

Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.


Hide 15119 2.INSTALL OIL PUMP COVER

a.
B011431

Install the oil pump cover with the 5 bolts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)


Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.
A052074E10
0.531,1.563 0.594,1.563 0.594,1.563 0.698,1.802 false 1.917,1.625 1.365,1.625 false 1.083,0.854 1.198,0.854 1.198,0.854 1.729,1.24 false 0.135,1.458 0.458,1.635 0.323,0.177 10 false Plug 1.969,1.542 2.792,1.729 0.823,0.188 10 false Valve Spring 0.135,0.76 0.906,0.948 0.771,0.188 10 false Relief Valve

Coat the relief valve with engine oil.


b.

Insert the relief valve and spring into the pump body hole.


c.

Using a 27 mm socket wrench, install the plug.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 15014 4.INSTALL OIL PUMP STRAINER

a.
B011430

Install a new gasket and the oil strainer with the 2 nuts.

Torque:
8.8 N*m (90 kgf*cm, 78 in.*lbf)