Home › Drivetrain › TIRE AND WHEEL › TIRE PRESSURE WARNING RECEIVER › from 2016.05
RM24M0E _52 Drivetrain _059557 TIRE AND WHEEL _0291869 TIRE PRESSURE WARNING RECEIVER A

TIRE AND WHEEL  TIRE PRESSURE WARNING RECEIVER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal (See page Drivetrain>TIRE AND WHEEL>TIRE PRESSURE WARNING SYSTEM>DATA LIST / ACTIVE TEST).


PROCEDURE

Hide 64740A 1.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 89760C 2.REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.
C356265

Remove the bolt.


b.

Disconnect the connector to remove the tire pressure warning ECU and receiver.