Home › Brake › BRAKE › BRAKE PEDAL › 2013.04–2016.05
RM24M0E _54 Brake _059558 BRAKE _0291874 BRAKE PEDAL G

BRAKE  BRAKE PEDAL  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
A167698E10
0.049,0.83 0.780,0.991 0.731,0.161 10 Not pushed 2.086,0.83 2.583,0.996 0.497,0.166 10 Pushed 2.377,2.052 2.484,2.200 0.107,0.148 10 1 1.004,2.052 1.121,2.209 0.116,0.157 10 2 1.004,2.733 1.103,2.877 0.098,0.143 10 4 2.377,2.733 2.484,2.881 0.107,0.148 10 3 1.127,2.131 1.637,2.3 false 1.133,2.806 1.624,2.532 false 1.897,2.532 2.36,2.8 false 1.886,2.301 2.344,2.147 false

Measure the resistance of the switch.

Standard resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Not pushed Below 1 Ω
3 - 4 Pushed
1 - 2 Pushed 10 kΩ or higher
3 - 4 Not pushed


If the result is not as specified, replace the stop light switch assembly.