Home › Brake › BRAKE › BRAKE BOOSTER(for 2AZ-FE RHD)
RM24M0E _54 Brake _059558 BRAKE _0291881 BRAKE BOOSTER(for 2AZ-FE RHD) G

BRAKE  BRAKE BOOSTER(for 2AZ-FE RHD)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 44610 1.CHECK BRAKE BOOSTER ASSEMBLY

C111618E03
0.24,0.073 0.958,0.24 0.719,0.167 10 false CORRECT 1.729,0.073 2.625,0.24 0.896,0.167 10 false INCORRECT 0.583,1.854 0.854,2.042 0.271,0.188 10 false 1st 0.875,1.771 1.198,1.958 0.323,0.188 10 false 2nd 1.188,1.625 1.49,1.823 0.302,0.198 10 false 3rd

a.

Airtightness check.

i.

Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.


ii.

Make sure the booster is airtight. Check that the distance the pedal can be depressed decreases gradually in correlation with each subsequent press of the pedal.

If the pedal is not as specified, check the check valve.

If the check valve is normal, replace the booster.


iii.

Start the engine. Depress and hold down the pedal, and stop the engine.


iv.

Make sure the booster is airtight. Hold the pedal for 30 seconds and check that there is no change in the pedal reserve distance.

If the pedal is not as specified, check the check valve.

If the check valve is normal, replace the booster.



b.

Operation check.

i.

Stop the engine.


ii.
C128542

Depress the pedal several times and check that there is no change in the pedal reserve distance.


iii.
C128543

Depress and hold down the pedal, and start the engine. Check that the pedal can only be depressed slightly.

If the pedal is not as specified, check the check valve.

If the check valve is normal, replace the booster.



Hide 44730 2.CHECK BRAKE VACUUM CHECK VALVE ASSEMBLY

C133754E01
1.985,0 3.043,0.191 1.059,0.191 10 No Ventilation 0.527,0 1.253,0.191 0.725,0.191 10 Ventilation

a.

Check the check valve.

i.

Slide the clip and disconnect the vacuum hose.


ii.

Remove the check valve from the booster.


iii.

Check that there is ventilation from the booster to the engine, and no ventilation from the engine to the booster.

If the results are not as specified, replace the check valve assembly.