Home › Brake › BRAKE › FRONT BRAKE(for 17 inch Front Disc Brake) › from 2016.05
RM24M0E _54 Brake _059558 BRAKE _0291884 FRONT BRAKE(for 17 inch Front Disc Brake) A

BRAKE  FRONT BRAKE(for 17 inch Front Disc Brake)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

Perform the removal and installation of the front disc brake piston, cylinder boot and piston seal one side at a time.


PROCEDURE

Hide 47731 1.REMOVE FRONT DISC BRAKE PISTON

a.
C165880E01
1.337,1.922 0.8,1.922 false 2.724,1.561 2.824,1.289 2.824,1.289 2.876,1.289 false 0.607,1.832 0.842,1.998 0.236,0.167 10 *a 2.911,1.188 3.147,1.355 0.236,0.167 10 *b

Place a piece of cloth and a wooden block between the front disc brake piston and front disc brake cylinder.

Text in Illustration
*a Cloth
*b Wooden Block

HINT:

Make sure to place the wooden block between the front disc brake piston which is not to be removed and the front disc brake cylinder.



b.

Apply compressed air to remove the front disc brake piston from the front disc brake cylinder.

NOTICE:
·

Do not hold the front disc brake cylinder with any part of your hand between the front disc brake cylinder and front disc brake piston.

·

Do not place any part of your hand in front of the front disc brake piston when using compressed air as a severe injury may result.

·

Do not allow any brake fluid to spatter.




Hide 2.REMOVE CYLINDER BOOT

a.
C165881E03
2.348,1.464 2.506,1.633 0.158,0.170 10 *a 2.053,1.237 2.231,1.545 2.231,1.545 2.317,1.545 false

Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the front disc brake cylinder.

Text in Illustration
*a Protective Tape

NOTICE:

Be careful not to damage the front disc brake cylinder.



Hide 3.REMOVE PISTON SEAL

a.
C165882E03
2.394,1.316 2.568,1.470 0.173,0.155 10 *a 1.817,1.123 2.292,1.395 2.292,1.395 2.366,1.395 false

Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the front disc brake cylinder.

Text in Illustration
*a Protective Tape

NOTICE:

Do not damage the inner surface or piston seal groove of the front disc brake cylinder.



Hide 31478B 4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 47547B 5.REMOVE FRONT DISC BRAKE BLEEDER PLUG