Home › Brake › BRAKE › FRONT BRAKE(for 17 inch Front Disc Brake) › from 2016.05
RM24M0E _54 Brake _059558 BRAKE _0291884 FRONT BRAKE(for 17 inch Front Disc Brake) A

BRAKE  FRONT BRAKE(for 17 inch Front Disc Brake)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

Perform the removal and installation of the front disc brake piston, cylinder boot and piston seal one side at a time.


PROCEDURE

Hide 47547B 1.TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

HINT:

Fully tighten the front disc brake bleeder plug after bleeding the system.


Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 3.INSTALL PISTON SEAL

a.
C356404

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

Text in Illustration
V100155

Lithium Soap Base Glycol Grease


b.

Install the piston seal to the front disc brake cylinder.

NOTICE:

Securely install the piston seal into the groove of the front disc brake cylinder.



Hide 47731 4.INSTALL FRONT DISC BRAKE PISTON

a.
C356406E02
0.99,2.646 0.99,3.115 false 1.396,1.094 1.938,0.552 1.938,0.552 2.052,0.552 false 2.104,0.469 2.802,0.865 0.698,0.396 10 false *1 0.906,3.146 1.219,3.354 0.313,0.208 10 false *2

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.

Text in Illustration
*1 Cylinder Boot
*2 Front Disc Brake Piston
V100155

Lithium Soap Base Glycol Grease


b.

Install the cylinder boot to the front disc brake piston.

NOTICE:

Securely install the cylinder boot into the groove of the front disc brake piston.



c.

Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the front disc brake cylinder.

NOTICE:

Do not forcibly install the front disc brake piston into the front disc brake cylinder.



Hide 5.INSTALL CYLINDER BOOT

a.
C193907E03
1.99,1.042 1.99,1.333 1.99,1.333 1.896,1.333 false 1.625,0.406 1.729,0.406 1.729,0.406 1.729,0.604 false 2.552,0.427 2.26,0.427 false 1.698,1.229 1.948,1.438 0.25,0.208 10 false *1 1.458,0.313 1.708,0.521 0.25,0.208 10 false *3 2.063,0.323 2.313,0.531 0.25,0.208 10 false *2

Install the cylinder boot to the front disc brake cylinder as shown in the illustration.

Text in Illustration
*1 Cylinder Boot
*2 Front Disc Brake Piston
*3 Front Disc Brake Cylinder

NOTICE:
·

Securely install the cylinder boot into the groove of the front disc brake cylinder and front disc brake piston.

·

Do not damage the cylinder boot.