Home › Brake › PARKING BRAKE › PARKING BRAKE PEDAL
RM24M0E _54 Brake _059559 PARKING BRAKE _0291886 PARKING BRAKE PEDAL G

PARKING BRAKE  PARKING BRAKE PEDAL  INSPECTION  


PROCEDURE

Hide 84550 1.CHECK PARKING BRAKE SWITCH ASSEMBLY

a.
C136927E01
0.967,0.268 1.748,0.431 0.781,0.163 10 Released 0.967,0.655 1.748,0.818 0.781,0.163 10 Pushed In

Measure the resistance of the switch.

Standard resistance:
Tester Connection Condition Specified Condition
1 - Body ground Parking brake switch ON (Switch pin released) Below 1 Ω
1 - Body ground Parking brake switch OFF (Switch pin pushed in) 10 kΩ or higher


If the result is not as specified, replace the switch assembly.