45407
1.REMOVE TIE ROD END SUB-ASSEMBLY LH
Place matchmarks on the tie rod end, lock nut and rack end.
Loosen the lock nut, and remove the tie rod end and lock nut.
45046
2.REMOVE TIE ROD END SUB-ASSEMBLY RH
Use the same procedures described for the LH side.
45535B
3.REMOVE STEERING RACK BOOT CLIP (for LH Side)
Using pliers, remove the steering rack boot clip.
45535B
4.REMOVE STEERING RACK BOOT CLIP (for RH Side)
Perform the same procedure as for the LH side.
45536A
5.REMOVE NO. 2 STEERING RACK BOOT CLAMP
Using a screwdriver, remove the No. 2 steering rack boot clamp.
Be careful not to damage the No. 2 steering rack boot.
45535D
6.REMOVE NO. 1 STEERING RACK BOOT CLAMP
Perform the same procedure as for the LH side.
45536
7.REMOVE NO. 2 STEERING RACK BOOT
45535
8.REMOVE NO. 1 STEERING RACK BOOT