The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the engine switch to on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry or Light Control.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Lighting Time | 15 s | Changes illumination duration after door closure.
(It will quickly fade out in case of turning engine switch on (IG). |
7.5 s / 15 s / 30 s |
| I/L when ACC OFF | ON | Illuminates light when engine switch turned on (ACC).
(Room light illuminated when room light switch in DOOR position) |
ON / OFF |
| I/L ON W/Door Key Unlock | ON | Function to light up room light, when unlocking with door key cylinder/wireless transmitter.
(Room light illuminated when room light switch in DOOR position) |
ON / OFF |
| Illumination System | ON | Illuminated entry function | ON / OFF |
| Light Control | ON | Function to light up foot light when engine switch is on (IG) and shift position is not P. | ON / OFF |
| Interior Light Control | ON | Function to light up room light, when the illuminated entry function is operating. | ON / OFF |
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Response Time | Normal | Delay time | Normal / Long |
| Sensitivity | Normal | Sensitivity adjustment | Normal
Dark2 Dark1 Light1 Light2 |
| Disp Ex ON Sen | Normal | Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.* | Normal
Dark2 Dark1 Light1 Light2 |
| Disp Ex OFF Sen | Normal | Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.* | Normal
Dark2 Dark1 Light1 Light2 |
Sensitivity adjustments are difficult to confirm. Check by driving the customer's vehicle.
Customizing using the multi-display
Turn the engine switch to on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle customization / Light settings.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Sensitivity | Normal | Sensitivity adjustment | Normal
Dark2 Dark1 Light1 Light2 |
| Lighting Time | 15 s | Changes illumination duration after door closure.
(It will quickly fade out in case of turning engine switch on (IG). |
7.5 s / 15 s / 30 s |
Sensitivity adjustments are difficult to confirm. Check by driving the customer's vehicle.