Use the same procedures for the RH and LH side.
The procedures listed below are for the LH side.
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
87940
2.REMOVE OUTER REAR VIEW MIRROR
87945B
3.REMOVE OUTER MIRROR COVER LH
Detach the 8 claws and remove the cover.
81740
4.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
Disconnect the connector.
Remove the 2 screws and side turn signal light.