Home › Vehicle Interior › LIGHTING › VANITY LIGHT
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291943 VANITY LIGHT G

LIGHTING  VANITY LIGHT  INSPECTION  


PROCEDURE

Hide 74320 1.INSPECT VISOR ASSEMBLY

E125682E05
0.958,1.469 0.958,1.76 false 2.479,1.469 2.479,1.781 false 0.917,1.781 1.031,1.948 0.115,0.167 10 false E 2.438,1.781 2.552,1.948 0.115,0.167 10 false B

a.

Remove the visor assembly.


b.

Inspect vanity light switch.

Standard resistance:
Tester Connection Condition Specified Condition
1 (E) - 2 (B) Visor raise 10 kΩ or higher
Visor lower and mirror cover open Below 1 Ω
Visor lower and mirror cover close 10 kΩ or higher


If the result is not as specified, replace the visor assembly.