Home › Vehicle Interior › LIGHTING › HEADLIGHT LEVELING SWITCH
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291945 HEADLIGHT LEVELING SWITCH G

LIGHTING  HEADLIGHT LEVELING SWITCH  INSPECTION  


PROCEDURE

Hide 84152 1.INSPECT HEADLIGHT LEVELING SWITCH

E114455E13
2.417,0.646 2.625,0.229 false 2.531,0.635 2.875,0.229 false 2.302,0.646 2.188,0.25 false 2.177,0.656 1.823,0.26 false 2.198,2.865 2.656,3.042 0.458,0.177 10 false Battery 2.833,0.083 3.031,0.229 0.198,0.146 10 false +B 1.74,0.083 1.875,0.24 0.135,0.156 10 false E 2.573,0.063 2.698,0.219 0.125,0.156 10 false T 2.01,0.073 2.375,0.24 0.365,0.167 10 false ILL +

a.

Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 4.

Standard voltage:
Tester Connection Switch Condition Specified Condition
1 (+B) - 4 (E)
2 (T) - 4 (E)
0 0.87 to 0.93 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
1 0.76 to 0.82 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
2 0.66 to 0.72 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
3 0.55 to 0.61 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
4 0.44 to 0.50 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
5 0.34 to 0.40 V


If the result is not as specified, replace the headlight leveling switch.


b.

Inspect the switch illumination.

i.

Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 4(E), then check that the light comes on.

OK:

LED comes on.


If the result is not as specified, replace the LED.