84155
1.INSPECT AFS OFF SWITCH
Measure the resistance of the switch.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 (E) - 4 (MSW) | ON (Pushed) | Below 1 Ω |
| 1 (E) - 4 (MSW) | OFF (Not pushed) | 10 kΩ or higher |
If the result is not as specified, replace the switch assembly.
Inspect the switch illumination.
Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 2 (ILL-), then check that the light comes on.
LED comes on.
If the result is not as specified, replace the LED.