Home › Vehicle Interior › LIGHTING › HEIGHT CONTROL SENSOR
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291958 HEIGHT CONTROL SENSOR G

LIGHTING  HEIGHT CONTROL SENSOR  INSPECTION  


PROCEDURE

Hide 89408C 1.INSPECT HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH

E127511E04
0.177,2.093 0.731,2.262 0.554,0.169 10 -39.2° 1.737,2.585 2.291,2.754 0.554,0.169 10 +59.1° 1.644,1.766 2.093,1.935 0.449,0.169 10 +45° 0.524,2.641 1.130,2.786 0.606,0.145 10 Standard 0.995,4.355 1.326,4.500 0.331,0.145 10 SHB 1.536,4.355 2.027,4.500 0.490,0.145 10 SHRR 2.196,4.355 2.528,4.500 0.331,0.145 10 SHG 0.033,0.054 0.844,0.374 0.811,0.320 10 Link Stopper Position 1.725,3.933 1.725,4.345 false 1.916,3.933 2.211,4.345 false 1.531,3.933 1.266,4.345 false

a.

Connect 3 dry cell batteries (1.5 V) in a series.


b.

Connect the positive (+) lead from the batteries to terminal 3 and negative (-) lead to terminal 1.


c.

Measure the voltage between terminals 1 and 2 when slowly move the link up and down.

Standard voltage:
Tester Connection Condition Specified Condition
1 - 2 +45°(High) Approx. 4.05 V
1 - 2 0°(Normal) Approx. 2.25 V
1 - 2 -39.2°(Low) Approx. 0.68 V


If the result is not as specified, replace the sensor.