Home › Vehicle Interior › LIGHTING › STOP LIGHT SWITCH › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291961 STOP LIGHT SWITCH G

LIGHTING  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

E169040E01
1.026,0.463 3.548,0.832 2.522,0.369 10 Component without harness connected: (Stop Light Switch Assembly)

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed 10 kΩ or higher
Not pushed Below 1 Ω
3 - 4 Pushed Below 1 Ω
Not pushed 10 kΩ or higher


If the result is not as specified, replace the stop light switch assembly.