Home › Vehicle Interior › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY(for LED Headlight) › from 2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291967 REAR COMBINATION LIGHT ASSEMBLY(for LED Headlight) A

LIGHTING  REAR COMBINATION LIGHT ASSEMBLY(for LED Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81591B 1.INSTALL REAR LIGHT LENS AND BODY

Hide 81585 2.INSTALL REAR LIGHT SOCKET AND WIRE

a.
E348388

Connect the connector.


b.

Engage the 5 clamps to install the rear light socket and wire.


Hide 81550N 3.INSTALL BACK-UP LIGHT BULB

a.

Install the back-up light bulb to the rear light socket and wire.


b.
E348387

Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to install them as a unit.


Hide 81594A 4.INSTALL REAR LIGHT GASKET

a.
E348385

Install a new rear light gasket.


Hide 81584 5.INSTALL REAR LIGHT PACKING

a.
E348384

Install a new rear light packing.


Hide 81561 6.INSTALL REAR COMBINATION LIGHT LENS

Hide 81550M 7.INSTALL REAR TURN SIGNAL LIGHT SOCKET

a.
E348379

Connect the connector.


b.

Engage the clamp to install the rear turn signal light socket.


Hide 81550L 8.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear turn signal light socket.


b.
E348359

Turn the rear turn signal light socket with the rear turn signal light bulb as shown in the illustration to install them as a unit.


Hide 81562 9.INSTALL REAR COMBINATION LIGHT LENS GASKET

a.
E348377

Install a new rear combination light lens gasket.