Home › Vehicle Interior › LIGHTING › LIGHTING SYSTEM(for LED Headlight) › from 2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291968 LIGHTING SYSTEM(for LED Headlight) D

LIGHTING  LIGHTING SYSTEM(for LED Headlight)  OPERATION CHECK  


AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


a.

Turn the engine switch to on (IG).


b.

Turn the light control switch to the AUTO position.


c.

Cover the automatic light control sensor.


d.

Check that the taillights and low beam headlights illuminate.


e.

Uncover the automatic light control sensor.


f.

Check that the low beam headlights and taillights turn off.



LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK


a.

When the light control switch is in the tail or head position:

i.

Turn the engine switch to on (IG).


ii.

Turn the low beam headlights or high beam headlights on.


iii.

Turn the engine switch off.


iv.

Check that the low beam headlights and high beam headlights turn off immediately.

HINT:

Taillights remain on.




b.

When the light control switch is in the AUTO position:

i.

Turn the engine switch to on (IG).


ii.

Turn the taillights, low beam headlights or high beam headlights on.


iii.

Turn the engine switch off.


iv.

Check that all of the lights turn off immediately.




DAYTIME LIGHT SYSTEM OPERATION CHECK


a.

Turn the engine switch to on (IG).


b.

Turn the light control switch to the off or AUTO position (with the low beam headlights not turned on by the automatic light control system).


c.

Release the parking brake.


d.

Check that the daytime lights illuminate.



ILLUMINATED ENTRY FUNCTION OPERATION CHECK


a.

Illuminated entry function controls the following lights:

·

Engine switch light

·

Inside handle illumination light

·

Map light

·

Room light



b.

Check that the lights come on when unlocking any of the doors that are closed and locked with the engine switch off. Then check that the lights fade out under the following conditions:

i.

Leave the doors unlocked for 15 seconds.


ii.

Turn the engine switch on (ACC or IG).


iii.

Lock all the doors.



c.

Check that the lights stay on for at least 15 seconds after opening any of the doors before fading out. Then check that the lights fade out 15 seconds after closing all the doors.


d.

Check that the lights stay lit after turning the engine switch off with all the doors closed and the engine switch in the on (ACC or IG). Then check that the lights fade out under the following conditions:

i.

Leave the doors unlocked for 15 seconds.


ii.

Turn the engine switch on (ACC or IG).


iii.

Lock all the doors.



e.

Check that the lights stay on for at least 15 seconds after opening any of the doors. Then check that the lights fade out 15 seconds after closing all the doors.


f.

Check that the lights come on when opening any of the doors and fade out when closing and locking all the doors or turning the engine switch on (ACC or IG).



INSIDE HANDLE ILLUMINATION LIGHT OPERATION CHECK


a.

Check that the lights come on when unlocking any of the doors that are closed and locked with the engine switch off. Then check that the lights fade out under the following conditions:

i.

Leave the doors unlocked for 15 seconds.


ii.

Lock all the closed doors and turn the engine switch off.



b.

Check that the lights stay on for at least 15 seconds under the following conditions before going off.

i.

Turn the engine switch on (IG), and shift the shift lever to the P position.


ii.

Open any of the doors.



c.

Check that the lights dim before going off under the following conditions.

i.

Turn the engine switch on (IG) and shift the shift lever into any position other than P.



d.

Check the conditions below before the lights go off.

i.

The lights dim when shifting into a position other than P and closing all the doors with the engine switch on (IG).


ii.

The lights come on for 15 seconds and fade out when shifting into the P position and closing all the doors with the engine switch off.



e.

Check that the lights come on after opening any of the doors.


f.

Check that the lights fade out 15 seconds after closing all the doors, or locking all the doors.


g.

Check that the lights come on gradually with the engine switch on (IG) and the shift lever in the P position.


h.

Check that the lights dim when shifting from P into another position with all the doors closed.


i.

Check that the lights stay dimmed with the engine switch on (IG) and the shift lever in a position other than P.



BATTERY SAVER OPERATION CHECK


a.

Turn the engine switch off and close all the doors.


b.

Open any door to turn the map (room) light on, and leave it open. Check that the light goes off after about 20 minutes.


c.

After the map (room) light goes off, close the driver's door.


d.

Open any door to turn the map (room) light on, and then open another door. Check that the map (room) light goes off within 20 minutes after opening the doors.


e.

Close all the doors. Open any door to turn the map (room) light on. Check that the map (room) light goes off within 20 minutes.