Home › Vehicle Interior › WIPER / WASHER › REAR WIPER MOTOR
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291970 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

E115187E01
1.019,1.672 1.255,1.814 0.236,0.142 10 +B 1.62,1.679 1.856,1.821 0.236,0.142 10 C1 2.171,1.678 2.407,1.820 0.236,0.142 10 LS 1.396,1.321 1.148,1.652 false 1.695,1.383 1.695,1.647 false 2.082,1.358 2.275,1.678 false

a.

Check the wiper operation.

i.

Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 1 (LS), and check that the motor operates.

OK:

Motor operates.


If the result is not as specified, replace the motor assembly.



b.

Check the INT operation.

i.

Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 2 (C1), and check that the motor operates.

OK:

Motor operates.


If the result is not as specified, replace the motor assembly.



c.

Check the automatic stop operation.

i.

Connect the battery's positive (+) lead to terminal 3 (+B) and the negative (-) lead to terminal 1 (LS). With the motor rotating, disconnect terminal 3 (+B) to stop the wiper motor operation at the automatic stop position.


ii.
B131465E02
1.539,0.285 1.977,0.468 0.438,0.184 10 175° 2.011,0.184 2.305,0.330 0.294,0.147 10 +3° 2.028,0.386 2.440,0.532 0.412,0.147 10 -3° 0.05,1.551 0.956,1.872 0.906,0.321 10 Automatic Stop Position 0.49,0.76 0.246,1.551 false

Check that the motor stops automatically at the automatic stop position.

OK:

Refer to illustration.


If the result is not as specified, replace the motor assembly.