Home › Vehicle Interior › WIPER / WASHER › REAR WIPER RUBBER
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291971 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  INSTALLATION  


PROCEDURE

Hide 85214R 1.INSTALL REAR WIPER RUBBER

B117904E03
0.055,0.04 1.322,0.182 1.267,0.142 10 No. 1 Backing Plate 1.702,1.761 2.969,1.903 1.267,0.142 10 No. 2 Backing Plate 1.345,0.262 1.862,0.418 0.517,0.156 10 Curved 2.218,1.228 2.468,1.761 false 0.417,0.251 0.798,1.076 false

a.

Install the No. 1 and No. 2 backing plates as shown in the illustration.

NOTICE:

Install the backing plates facing the correct direction.



b.
B117902E08
0.99,0.656 1.271,0.302 false 2.604,1.177 2.188,1.385 true 2.688,1.302 2.74,1.74 true 1.271,0 1.781,0.323 0.51,0.323 10 false Second Claw 1.281,1.385 2.292,1.542 1.01,0.156 10 false Rear End Claw 1.615,1.74 2.771,1.927 1.156,0.188 10 false Rear End Stopper

Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.


c.

After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.


d.
B117903E01
0.055,0.079 1.076,0.228 1.021,0.149 10 Front End Claw 1.623,0.521 1.283,0.182 false

Slide the wiper rubber through the front end claw.


Hide 85242 2.INSTALL REAR WIPER BLADE ASSEMBLY

E357782

a.

Push the wiper blade straight toward the right side of the vehicle to install it to the wiper arm.


b.
B145113

Lower the arm and blade.


c.

Rotate and install the cap.