Home › Vehicle Interior › WIPER / WASHER › REAR WIPER RUBBER
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291971 REAR WIPER RUBBER A

WIPER / WASHER  REAR WIPER RUBBER  REMOVAL  


PROCEDURE

Hide 85242 1.REMOVE REAR WIPER BLADE ASSEMBLY

a.
B145112

Rotate and remove the cap.


b.

Raise the arm and blade.


c.
E357781

Raise the wiper blade to the position where the claw detaches with a ''click'' sound, as shown in the illustration.

NOTICE:

Be careful not to damage the claw.



d.
E310349

Pull the wiper blade straight toward the left side of the vehicle to remove it from the wiper arm.

NOTICE:

Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.



Hide 85214R 2.REMOVE REAR WIPER RUBBER

B117843E12
2.438,0.667 2.667,0.833 0.229,0.167 10 false Lift 2.719,1.792 3,1.938 0.281,0.146 10 false Pull 1.906,0.052 3.094,0.208 1.188,0.156 10 false Lightly Push (Grip) 0.354,1.552 0.875,1.708 0.521,0.156 10 false Stopper 0.344,1.719 1.604,1.865 1.26,0.146 10 true (Rear End of Blade)

a.

Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration.

NOTICE:

Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.


HINT:

Lightly pushing the rubber between the ends and middle will allow it to be removed more easily.



b.

Remove the backing plates from the wiper rubber.