Home › Vehicle Interior › WIPER / WASHER › WASHER MOTOR
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291973 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

E114464

HINT:

This check should be performed with the windshield washer motor and pump installed to the washer jar.


a.

Fill the washer jar with washer fluid.


b.

Connect the battery's positive (+) lead to terminal 1 and the negative (-) lead to terminal 2 of the washer motor and pump.


c.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from washer jar.


If the result is not as specified, replace the washer motor and pump assembly.


Hide 85310R 2.INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY

E114465

HINT:

This check should be performed with the windshield washer motor and pump installed to the washer jar.


a.

Fill the washer jar with washer fluid.


b.

Connect the battery's positive (+) lead to terminal 1 and the negative (-) lead to terminal 2 of the washer motor and pump.


c.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from washer jar.


If the result is not as specified, replace the washer motor and pump assembly.


Hide 85280A 3.INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

I004068E03
1.396,0.875 1.948,0.646 false 1.406,1.104 1.635,1.375 false 1.656,1.292 1.75,1.448 0.094,0.156 10 false 1 1.99,0.542 2.083,0.698 0.094,0.156 10 false 2

a.

Apply battery voltage to the headlight cleaner motor and check the operation of the headlight cleaner motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Headlight cleaner motor normal operation


If the result is not as specified, replace the actuator.