Home › Vehicle Interior › WIPER / WASHER › FRONT WIPER RUBBER
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291975 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 85214B 1.INSTALL WIPER RUBBER

E125260

a.

Install the 2 backing plates to the rubber.

NOTICE:

Install the backing plates facing the proper direction.



b.
E125261

Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

HINT:

Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.



c.

Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.

NOTICE:

Push the wiper blade into the grooves of the wiper rubber to attach them completely.



Hide 85291B 2.INSTALL FRONT WIPER BLADE

a.

Install the wiper blade.


b.

Install the holder as shown in the illustration.

B145945