Perform the auto-search of the radio and check that it functions normally.
Radio auto-search functions normally.
NG
OK
Check if the telephone antenna, and other optional components are installed.
Optional component(s) installed.
NG
OK
With the ignition switch on (ACC), turn on the radio and choose the AM mode.
Place the tip of a screwdriver on the antenna and check that noise is heard from the speakers.
Noise is heard.
NG
OK
Remove the antenna plug of the radio receiver.
With the radio receiver connector connected, turn the ignition switch on (ACC).
Turn on the radio and choose the AM mode.
Place a flat-head screwdriver or a piece of metal, such as a thin wire, on the antenna jack of the radio receiver. Check that noise is heard from the speakers.
Noise is heard.
OK
NG