Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM24M0E _56 Audio / Visual / Telematics _059566 AUDIO / VIDEO _0291977 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CD cannot be Inserted or is Ejected Right After Insertion  


PROCEDURE

1.CHECK IF PROPER CD IS INSERTED
a.

Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.

OK:

CD is a normal audio CD.


HINT:

Translucent or uniquely-shaped CDs cannot be played.




OK

2.CHECK THAT CD IS INSERTED PROPERLY

NG

CD IS FAULTY

2.CHECK THAT CD IS INSERTED PROPERLY
a.

Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.




OK

3.CLEAN CD

NG

INSERT CD PROPERLY

3.CLEAN CD
a.
I100151

Clean the disc by wiping the CD's underside radially with a soft cloth.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.




NG

4.REPLACE CD WITH ANOTHER AND RECHECK

OK

CD WAS DIRTY

4.REPLACE CD WITH ANOTHER AND RECHECK
a.

Replace the CD with a normal one and check if the same problem occurs again.

OK:

Malfunction disappears.




OK

CD IS FAULTY

NG

PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE