| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 01-E0 | "Registration complete" signal from master device cannot be received | - |
| 01-E3 | Registration demand signal from slave device is output. Or registration demand signal is output by receiving connection confirmation signal from sub-master device. | - |
| 01-E4 | Multiple frame transmission is incomplete | - |
Even if no failure is detected, a trouble code may be recorded depending on the battery condition or engine start voltage.
Check for DTCs.
If any other DTCs besides 01-E0, 01-E3 or 01-E4 are output, perform troubleshooting for the those DTCs first.
After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.
| Result | Proceed to |
|---|---|
| Only DTC 01-E0, 01-E3, and/or 01-E4 are output | A |
| DTC 01-E0, 01-E3 and/or 01-E4 and other DTCs are output | B |
A
B