Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2013.04–2016.05
RM24M0E _56 Audio / Visual / Telematics _059566 AUDIO / VIDEO _0291977 AUDIO AND VISUAL SYSTEM C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  A2-46  Disc is Scratched, Dirty or Reversed  


DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
A2-46 Scratches or dirt is found on disc surface or disc is inserted upside down.
·

Disc

·

Television display assembly



CAUTION / NOTICE / HINT

HINT:

After the inspection is completed, clear the DTCs.


PROCEDURE

1.CHECK THAT DISC IS INSERTED PROPERLY
a.

Check whether or not the disc is inserted upside down.

OK:

Disc is properly inserted.




OK

2.CHECK DISC

NG

INSERT DISC PROPERLY

2.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.




OK

3.DISC CLEANING

NG

CHANGE DISC

3.DISC CLEANING
a.
I100151

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE:

Do not use a conventional record cleaner or antistatic preservative.




NEXT

4.CLEAR DTC
4.CLEAR DTC

NEXT

5.RECHECK FOR DTC
5.RECHECK FOR DTC
a.

Recheck for DTCs and check that no DTCs are output (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).

OK:

No DTCs are output.




OK

NG

6.REPLACE DISC WITH ANOTHER AND RECHECK
6.REPLACE DISC WITH ANOTHER AND RECHECK
a.

Replace the disc with a known good one.



c.

Recheck for DTCs and check that no DTCs are output (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).

OK:

No DTCs are output.




OK

END

NG

REPLACE TELEVISION DISPLAY ASSEMBLY