The television display assembly sends sound signals to the radio receiver assembly.
Disconnect the F10 radio receiver assembly connector.
Disconnect the Q21 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| Q21-7 (L+) - F10-4 (CDL+) | Always | Below 1 Ω |
| Q21-8 (L-) - F10-5 (CDL-) | Always | Below 1 Ω |
| Q21-9 (R+) - F10-2 (CDR+) | Always | Below 1 Ω |
| Q21-10 (R-) - F10-3 (CDR-) | Always | Below 1 Ω |
| Q21-11 (SLD9) - F10-1 (CSLD) | Always | Below 1 Ω |
| Q21-7 (L+) - Body ground | Always | 10 kΩ or higher |
| Q21-8 (L-) - Body ground | Always | 10 kΩ or higher |
| Q21-9 (R+) - Body ground | Always | 10 kΩ or higher |
| Q21-10 (R-) - Body ground | Always | 10 kΩ or higher |
| Q21-11 (SLD9) - Body ground | Always | 10 kΩ or higher |
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE)
NG