1.INSPECT STEERING PAD SWITCH
Measure the resistance of the switch.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 10 (AU1) - 8 (EAU) | Not pushed | 100 kΩ |
| 10 (AU1) - 8 (EAU) | Volume+ switch pushed | 1 kΩ |
| 10 (AU1) - 8 (EAU) | Volume- switch pushed | 3.11 kΩ |
| 10 (AU1) - 8 (EAU) | Seek+ switch pushed | Below 2.5 Ω |
| 10 (AU1) - 8 (EAU) | Seek- switch pushed | 329 Ω |
| 9 (AU2) - 8 (EAU)* | Not pushed | 100 kΩ |
| 9 (AU2) - 8 (EAU)* | MODE switch pushed | Below 2.5 Ω |
| 9 (AU2) - 8 (EAU)* | ON hook switch pushed | 329 Ω |
| 9 (AU2) - 8 (EAU)* | OFF hook switch pushed | 1 kΩ |
| 9 (AU2) - 8 (EAU)* | Voice switch pushed | 3.11 kΩ |
*: w/ Navigation System
If the result is not as specified, replace the steering pad switch.