1.INSTALL REAR NO. 2 SEAT ASSEMBLY RH
Fully tilt the seatback forward.
Place the seat onto the lock striker.
Fully lock the seat to the lock striker.
Confirm that the seat is firmly locked to the lock striker.
The rear leg should be set to the center of the lock striker.
Install the 3rd seat link with the 4 bolts.
Tighten the bolts in the order indicated in the illustration.
Install the seat to the 3rd seat link with the 4 bolts.
Tighten the bolts in the order indicated in the illustration.
Install the rear seat cushion wire with the nut.
79273A
2.INSTALL NO. 2 SEAT HINGE COVER
Attach the 3 claws and 3 clips to install the hinge cover.
79236B
3.INSTALL NO. 2 SEAT LEG COVER LH
Attach the claw and clip to install the leg cover.
79236A
4.INSTALL NO. 2 SEAT LEG COVER
Attach the claw and clip to install the leg cover.
79384
5.INSTALL NO. 3 SEAT LEG COVER REAR LH
Attach the 3 clips to install the leg cover.
64420A
6.INSTALL LUGGAGE ROOM BOX LID ASSEMBLY