64420A
1.REMOVE LUGGAGE ROOM BOX LID ASSEMBLY
79374
2.REMOVE NO. 3 SEAT LEG COVER REAR RH
Fully tilt the seatback forward.
Using a screwdriver, detach the 3 claws and remove the leg cover.
Tape the screwdriver tip before use.
79236B
3.REMOVE NO. 2 SEAT LEG COVER LH
Using a clip remover, remove the clip and detach the claw. Then remove the leg cover.
79236A
4.REMOVE NO. 2 SEAT LEG COVER
Using a clip remover, remove the clip and detach the claw. Then remove the leg cover.
79273A
5.REMOVE NO. 2 SEAT HINGE COVER
Using a clip remover, remove the 2 clips.
Detach the 2 claws and remove the hinge cover.
6.REMOVE REAR NO. 2 SEAT ASSEMBLY RH
Using a screwdriver, detach the claw and fold back the cover.
Tape the screwdriver tip before use.
Remove the nut and rear seat cushion wire.
Remove the 3 bolts and 3rd seat link.
Pull the lock release band backward and release the 4 seat cushion locks from the lock strikers.
Lift up the seat and remove the seat.
Be careful not to damage the vehicle body.
72905
7.REMOVE 3RD SEAT LINK SUB-ASSEMBLY RH
Remove the 4 bolts, and then disconnect the seat from the 3rd seat link.