1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
79236B
2.REMOVE NO. 2 SEAT LEG COVER LH
Using a clip remover, remove the 2 clips.
Detach the 2 claws and remove the leg cover.
79384
3.REMOVE NO. 3 SEAT LEG COVER REAR LH
Using a screwdriver, detach the 3 claws and remove the leg cover.
79273A
4.REMOVE NO. 2 SEAT HINGE COVER
Using a clip remover, remove the 4 clips.
Detach the 2 claws and remove the hinge cover.
5.REMOVE REAR NO. 2 SEAT ASSEMBLY LH
Detach the 2 clamps.
Disconnect the connector.
Remove the 6 bolts.
Using a screwdriver, detach the hook.
Tape the screwdriver tip before use.
Open the lower part of the seatback cover.
Operate the lever to release the 4 seat cushion locks from the lock strikers.
Lift up the seat and remove the seat.
Be careful not to damage the vehicle body.
79040
6.REMOVE NO. 3 SEAT LEG ASSEMBLY LH
Remove the nut.
Remove the 2 bolts and seat leg.