1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
79236A
2.REMOVE NO. 2 SEAT LEG COVER
Using a clip remover, remove the 2 clips.
Detach the 2 claws and remove the leg cover.
79374
3.REMOVE NO. 3 SEAT LEG COVER REAR RH
Using a screwdriver, detach the 6 claws and remove the 2 leg covers.
79273
4.REMOVE NO. 2 SEAT HINGE COVER
Using a clip remover, remove the 4 clips.
Detach the 4 claws and remove the hinge cover.
5.REMOVE REAR NO. 2 SEAT ASSEMBLY RH
Detach the 2 clamps.
Disconnect the connector.
Remove the 8 bolts.
Operate the lever on the seat's underside to release the 4 seat cushion locks from the lock strikers.
Lift up the seat and remove the seat.
Be careful not to damage the vehicle body.
79030
6.REMOVE NO. 3 SEAT LEG ASSEMBLY RH
Remove the 2 nuts.
Remove the 2 bolts and seat leg.