Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0291994 REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side)  INSTALLATION  


PROCEDURE

Hide 72906 1.INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH

a.
B136989E02
2.281,0.844 2.438,1.021 0.156,0.177 10 true 1 1.479,0.927 1.635,1.104 0.156,0.177 10 true 2 1.99,0.99 2.146,1.167 0.156,0.177 10 false 3

Install the 3rd seat link with the 3 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



Hide 2.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.
B141391E02
2.323,0.167 2.76,0.344 0.438,0.177 10 false Center

Fully tilt the seatback forward.


b.

Place the seat onto the lock striker.


c.

Fully lock the seat to the lock striker.

HINT:
·

Confirm that the seat is firmly locked to the lock striker.

·

The rear leg should be set to the center of the lock striker.




d.
B141392E02
2.802,0.552 2.958,0.729 0.156,0.177 10 false 1 2.802,0.813 2.958,0.99 0.156,0.177 10 true 2 1.49,0.802 1.646,0.979 0.156,0.177 10 false 3 1.49,1.042 1.646,1.219 0.156,0.177 10 false 4

Install the seat to the 3rd seat link with the 4 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



e.
B141393

Install the rear seat cushion wire with the nut.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 79273A 3.INSTALL NO. 2 SEAT HINGE COVER

a.
B136985

Attach the 2 claws and 2 clips to install the hinge cover.


Hide 79236B 4.INSTALL NO. 2 SEAT LEG COVER LH

a.
B141026

Attach the claw and clip to install the leg cover.


Hide 79236A 5.INSTALL NO. 2 SEAT LEG COVER

a.
B141027

Attach the claw and clip to install the leg cover.


Hide 79384 6.INSTALL NO. 3 SEAT LEG COVER REAR LH

a.
B136984

Attach the 3 clips to install the leg cover.


Hide 64420A 7.INSTALL LUGGAGE ROOM BOX LID ASSEMBLY