Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0291994 REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Manual Stowing Seat Type LH Side)  REMOVAL  


PROCEDURE

Hide 64420A 1.REMOVE LUGGAGE ROOM BOX LID ASSEMBLY

Hide 79384 2.REMOVE NO. 3 SEAT LEG COVER REAR LH

a.

Fully tilt the seatback forward.


b.
B136984

Using a screwdriver, detach the 3 claws and remove the leg cover.

HINT:

Tape the screwdriver tip before use.



Hide 79236B 3.REMOVE NO. 2 SEAT LEG COVER LH

a.
B141026

Using a clip remover, remove the clip and detach the claw. Then remove the leg cover.


Hide 79236A 4.REMOVE NO. 2 SEAT LEG COVER

a.
B141027

Using a clip remover, remove the clip and detach the claw. Then remove the leg cover.


Hide 79273A 5.REMOVE NO. 2 SEAT HINGE COVER

a.
B136985

Using a clip remover, remove the 2 clips.


b.

Detach the 2 claws and remove the hinge cover.


Hide 6.REMOVE REAR NO. 2 SEAT ASSEMBLY LH

a.
B136987

Using a screwdriver, detach the claw and fold back the cover.

HINT:

Tape the screwdriver tip before use.



b.

Remove the nut and rear seat cushion wire.


c.

Remove the 4 bolts. Then disconnect the seat from the 3rd seat link.


d.
B136988

Pull the lock release band backward and release the 4 seat cushion locks from the lock strikers.


e.

Lift up the seat and remove the seat.

NOTICE:

Be careful not to damage the vehicle body.



Hide 72906 7.REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

a.
B136989

Remove the 3 bolts and 3rd seat link.