Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0291995 REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 2 SEAT ASSEMBLY LH

a.

Fully tilt the seatback forward.


b.
B136660

Hold the seat legs in place by inserting screwdrivers to the locations shown in the illustration.

NOTICE:

The striker will not lock if the seat leg is not held in place by inserting the screwdriver.



c.
B140800

Lock the striker on the rear side.

HINT:

Confirm that the seat is firmly locked to the lock striker.



d.

Insert the location pin to the front side and lock the striker.


e.
B140569E03
0.75,0.969 0.865,1.125 0.115,0.156 10 false 1 1.271,1.167 1.396,1.323 0.125,0.156 10 true 2

Tighten bolt 1 and then bolt 2 on the front side.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


f.
B140568E03
0.917,0.75 1.073,0.927 0.156,0.177 10 false 1 1.615,1 1.771,1.177 0.156,0.177 10 false 2

Remove the screwdriver.


g.

Tighten bolt 1 and then bolt 2 on the rear side.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


Hide 72137E 2.INSTALL NO. 1 SEAT TRACK COVER

a.
B135808

Attach the 4 claws to install the 2 covers.