Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0291995 REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Tumble Seat Type LH Side)  REASSEMBLY  


PROCEDURE

Hide 71695E 1.INSTALL REAR NO. 2 SEAT PROTECTOR

a.
B459709

Install the 3 seat protectors.


b.
B147896E01
0.141,0.169 0.474,0.350 0.334,0.181 10 Tape 1.011,0.265 0.537,0.265 false 0.754,0.259 0.754,1.323 false 0.751,1.319 1.023,1.319 false 0.977,0.901 0.754,0.901 false 2.748,0.547 3.082,0.728 0.334,0.181 10 Tape 2.335,0.643 2.724,0.643 false 2.365,1.318 2.586,1.318 false 2.582,1.322 2.582,0.642 false

Apply new tape to the positions shown in the illustration.


Hide 72570C 2.INSTALL NO. 2 SEAT RECLINING ADJUSTING CABLE ASSEMBLY RH

a.
B148202E06
1.219,0.917 1.5,1.042 true 2.042,1.063 2.396,0.948 true 1.354,2.469 1.354,2.833 true 1.354,2.677 2.177,2.677 false 2.177,2.677 2.177,2.458 true 1.542,0.958 1.969,1.208 0.427,0.25 10 true Yellow 1.167,2.844 1.594,3.021 0.427,0.177 10 false Yellow

Install the 2 cables to the seatback as shown in the illustration.


b.
B136996

Clamp the cables to the seatback with 4 new cable ties as shown in the illustration.


c.
B137535E06
0.75,1.073 1.021,1.323 0.271,0.25 10 false Cut 0.906,4.031 1.615,4.208 0.708,0.177 10 false CORRECT 2.083,4.031 2.927,4.208 0.844,0.177 10 false INCORRECT 0.385,0.125 1.479,0.344 1.094,0.219 10 false 10 mm (0.40 in.)

Cut off the ends of the 4 cable ties as shown in the illustration.


d.

Attach the 4 clamps of the cable ties to the seatback.


Hide 72507D 3.INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY

a.
B137591

Install the 2 handles with the 2 nuts.

HINT:

Pass the handles through the hole in the seatback frame toward the front of the vehicle.



Hide 79204A 4.INSTALL NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH

a.
B140799E04
0.021,1.031 0.208,1.208 0.188,0.177 10 false (1) 0.115,1.563 0.302,1.74 0.188,0.177 10 false (2) 2.115,0.594 2.302,0.771 0.188,0.177 10 false (3) 1.885,0.479 2.073,0.656 0.188,0.177 10 false (4)

Temporarily install the seatback to the seat cushion with the 4 bolts.


b.

Tighten the 4 bolts in the order shown in the illustration.

Torque:
41 N*m (418 kgf*cm, 30 ft.*lbf)


c.

Connect the reclining adjusting cable to the seat cushion as shown in the illustration.


Hide 71694D 5.INSTALL REAR SEAT CUSHION HINGE COVER OUTER LH

a.
B135820

Install the hinge cover with the 2 screws.


Hide 71693C 6.INSTALL REAR SEAT CUSHION HINGE COVER OUTER RH

a.
B135819

Install the hinge cover with the 2 screws.


Hide 72552E 7.INSTALL RECLINING HINGE COVER LH

a.
B135816

Attach the claw.


b.

Install the hinge cover with the screw.


Hide 72552B 8.INSTALL RECLINING HINGE COVER RH

a.
B135817

Install the hinge cover with the screw.


Hide 79024 9.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



a.

Fabric Seat (Low Grade)

i.
B148105E02
2.073,2.271 1.792,1.854 false 0.385,4.25 0.979,4.427 0.594,0.177 10 false Hog Ring 2.135,2.198 3.115,2.375 0.979,0.177 10 false Hog Ring Pliers

Using hog ring pliers, install the seatback cover to the seatback pad with 2 new hog rings.


ii.

Install the seatback cover (with pad) to the seatback frame.



b.

Fabric Seat (High Grade), Leather Seat

i.
B141388E01
0.364,4.217 0.960,4.398 0.596,0.181 10 Hog Ring 2.068,2.111 3.050,2.293 0.982,0.181 10 Hog Ring Pliers 2.048,2.193 1.71,1.803 false

Using hog ring pliers, install the seatback cover to the seatback pad with 8 new hog rings.


ii.

Install the seatback cover (with pad) to the seatback frame.



c.
B136992

Attach the 4 claws to install the 2 headrest supports.


d.
B135815

Install the handle with the nut.


e.
B140785E02
0.354,1.854 0.771,2.031 0.417,0.177 10 false Zipper

Close the zippers.


f.
B140786E01
0.381,4.288 0.977,4.469 0.596,0.181 10 Hog Ring 2.13,1.955 3.112,2.136 0.982,0.181 10 Hog Ring Pliers 1.646,1.678 2.081,2.028 false

Using hog ring pliers, install 3 new hog rings.


g.
B148136E02
0.396,4.271 0.74,4.448 0.344,0.177 10 false Hook 3.021,3.719 3.208,3.896 0.188,0.177 10 true (1) 2.083,2.198 2.271,2.375 0.188,0.177 10 false (2)

Attach each of the 2 hooks as shown in the illustration.


Hide 72679 10.INSTALL REAR SEATBACK LOCK CONTROL BEZEL

a.
B457201

Attach the claw to install the bezel.


b.

Install the 2 screws.


Hide 71940E 11.INSTALL NO. 2 SEAT HEADREST ASSEMBLY

Hide 79022 12.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, avoid wrinkling the cover.



a.

Fabric Seat (Low Grade)

i.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 14 new hog rings.

B460072E01
2.469,2.167 2.115,1.813 false 2.5,2.167 4.792,2.365 2.292,0.198 10 false Hog Ring Pliers 0.375,3.365 2.667,3.563 2.292,0.198 10 false Hog Ring



b.

Fabric Seat (High Grade), Leather Seat

i.

Close the fastening tape.

B460044E01
2.458,2.188 2.073,1.854 false 2.5,2.146 4.427,2.385 1.927,0.24 10 false Hog Ring Pliers 0.375,3.094 2.302,3.333 1.927,0.24 10 false Hog Ring 0.365,3.385 2.292,3.625 1.927,0.24 10 false Fastening Tape


ii.

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 13 new hog rings.



c.
B137580E02
0.375,1.75 0.719,1.927 0.344,0.177 10 false Hook

Attach the hooks and install the seat cushion cover (with pad) to the seat cushion spring.


Hide 71844A 14.INSTALL REAR NO. 2 SEAT RECLINING COVER LH

a.
B140792

Attach the 8 claws to install the cover.


b.

Install the 2 screws.


Hide 71843D 15.INSTALL REAR NO. 2 SEAT RECLINING COVER RH

a.
B140804

Attach the 2 claws and seat cushion cover.


b.
B140795

Attach the 7 claws to install the cover.


c.

Install the 2 screws.


Hide 72997 16.INSTALL REAR SEATBACK COVER LH

a.
B147317

Attach the 2 claws.


b.
B135810

Install the cover with the 2 screws.


Hide 72996 17.INSTALL REAR SEATBACK COVER RH

a.
B147318

Attach the 2 claws.


b.
B135811

Install the cover with the 2 screws.