Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM
RM24M0E _58 Vehicle Interior _059567 SEAT _0291996 REAR POWER SEAT CONTROL SYSTEM D

SEAT  REAR POWER SEAT CONTROL SYSTEM  SYSTEM DESCRIPTION  


DESCRIPTION OF REAR POWER SEAT FUNCTION


·

The rear power seat function electrically stows and returns the third-row seat when the power folding seat switch is operated.

·

This system is used for both the left and right seats. Each system operates independently.



FUNCTIONS OF MAIN COMPONENTS


Components Function
Folding Motor
(Cushion Position Sensor)
The fold seat control ECU provides the voltage that is used to operate the folding motor. The folding motor stows and returns the third-row seat. (A Hall type position sensor is installed in the folding motor to detect the seat cushion position.)
Reclining Motor
(Seatback Position Sensor)
The fold seat control ECU provides the voltage that is used to operate the reclining motor. The reclining motor reclines and raises the seatback of the third-row seat. (A Hall type position sensor is installed in the reclining motor to detect the seatback position.)
Release Actuator The fold seat control ECU provides the voltage that releases the actuator that locks the seat leg.
Lock Switch Turns off when the third-row seat leg is secured to the floor and sends a signal to the fold seat control ECU.
Fold Lock Switch Turns off when the third-row seat cushion is stowed and sends a signal to the fold seat control ECU.
Power Rear Seat Switch Sends a seatback angle adjustment signal to the fold seat control ECU when operated. The seatback angle is adjusted based on this signal.
Fold Seat Switch Sends a third-row seat folding-down, stowing, or return operation signal to the fold seat control ECU when operated. The third-row seat is folded down, stowed, or returned to the original position based on this signal.


SYSTEM OPERATION


B148146E02
2.344,0.875 2.458,0.146 2.458,0.146 2.563,0.146 false 1.24,0.75 1.563,0.896 0.323,0.146 10 false 102° 2.719,1.083 3.042,1.229 0.323,0.146 10 false 68° 2.604,0.083 3.615,0.229 1.01,0.146 10 false Neutral Position 3.323,1.01 4.396,1.156 1.073,0.146 10 false 1. Original State 1.781,5.188 3.49,5.646 1.708,0.458 10 false 5. Automatic Operation (Press and hold the switch) 1.771,5.885 3.667,6.281 1.896,0.396 10 false 6. Manual Operation (Press and release the switch) 2.313,3.219 2.531,3.396 0.219,0.177 10 false (b) 4.229,4 4.469,4.177 0.24,0.177 10 false (a) 3.563,4.344 3.792,4.531 0.229,0.188 10 false (c) 4.24,3.323 4.469,3.542 0.229,0.219 10 false (e) 4.708,2.938 4.938,3.115 0.229,0.177 10 false (d)

a.

Return operation (from the stowed state to the original state)

i.

Switch operation

Push the stowing/return switch to the left and hold it there to return the seat.



ii.

Conditions

·

The back door is open.

·

The ignition switch is off or the shift lever is in the P position.


HINT:
·

If the above conditions are not met, the indicator on the switch will blink while the switch is pressed.

·

The buzzer will sound twice when the seat cushion return operation begins.

·

After the seat cushion return operation is complete, the buzzer will sound twice to indicate that the seatback auto return operation has begun.

·

If the switch is released, any other switch is pressed, or required conditions are no longer met midway through a return operation, the return operation will stop, the buzzer will sound for 10 seconds and the indicator on the switch will come on.

·

If the system detects that an object is caught or detects that the motor is locked, the system will stop the seat operation, the indicator will blink, and the buzzer will sound for 10 seconds.

·

The indicator will go off when normal operation resumes.





b.

Stowing operation (from the original state to the stowed state)

i.

Switch operation

Push the stowing/return switch to the right and hold it there to stow the seat.



ii.

Conditions

·

The back door is open.

·

The ignition switch is off or the shift lever is in the P position.


HINT:
·

The buzzer will sound twice when the seatback folding-down operation begins.

·

If the switch is released, any other switch is pressed, or required conditions are no longer met midway through a stowing operation, the stowing operation will stop. The buzzer will sound for 10 seconds and the indicator on the switch will come on.

·

If the system detects that an object is caught or detects that the motor is locked, the system will stop the seat operation, the indicator will blink, and the buzzer will sound for 10 seconds.

·

The indicator will go off when normal operation resumes.

·

The buzzer will sound twice when the operation is complete.





c.

Stowing operation (from the folded-down state to the stowed state)

i.

Switch operation

Push the stowing/return switch to the right and hold it there to stow the seat.



ii.

Conditions

·

The back door is open.

·

The ignition switch is off or the shift lever is in the P position.


HINT:
·

The buzzer will sound twice when the seat cushion stowing operation begins.

·

If the switch is released, any other switch is pressed, or required conditions are no longer met midway through a stowing operation, the stowing operation will stop, the buzzer will sound for 10 seconds and the indicator on the switch will come on.

·

If the system detects that an object is caught, the system will stop the seat operation, the indicator will blink, and the buzzer will sound for 10 seconds.

·

The indicator will go off when normal operation resumes.

·

The buzzer will sound twice when the operation is complete.





d.

Return operation (from the folded-down state to the original state)

i.

Switch operation

·

Press and release the folding switch.

·

Push the stowing/return switch to the left and release it.

·

Press the power rear seat switch to recline the seatback and release it.



ii.

Conditions

·

The back door is open.

·

The ignition switch is off or the shift lever is in the P position.

·

The seat cushion is secured.


HINT:
·

The power rear seat switch can be operated in the cabin to perform the return operation even while the vehicle is being driven.

·

If any other switch is pressed midway through a return operation, the return operation will stop. The buzzer will sound for 10 seconds and the indicator on the switch will come on.

·

If the system detects that an object is caught, the system will stop the return operation, the buzzer will sound for 10 seconds and the indicator on the switch will blink.

·

The indicator will go off when normal operation resumes.





e.

Folding-down operation (from the original state to the folded-down state)

i.

Switch operation

Press and release the folding switch.



ii.

Conditions

·

The back door is open.

·

The ignition switch is off or the shift lever is in the P position.

·

The seat cushion is secured.


HINT:
·

If any switch other than the folding switch is pressed midway through a folding-down operation, the folding operation will stop, the buzzer will sound for 10 seconds and the indicator on the switch will come on.

·

If the system detects that an object is caught, the system will stop the folding operation, the buzzer will sound for 10 seconds and the indicator on the switch will blink.

·

The indicator will go off when normal operation resumes.





f.

Reclining operation

i.

Switch operation

Press the power rear seat switch.



ii.

Conditions

·

The seat cushion is secured.

·

The seatback is within the reclining operation range.


HINT:

The operation will stop when the power rear seat switch is released or when the seatback position reaches either end of the reclining operation range.