Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059567 SEAT _0291996 REAR POWER SEAT CONTROL SYSTEM D

SEAT  REAR POWER SEAT CONTROL SYSTEM  INITIALIZATION  


HINT:

The seatback position is initialized at the factory before shipment, so initialization is not normally required.

There is an initialization function for cases when initialization is required.


INITIALIZATION PROCEDURE


HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.

·

Before starting the following procedure, make sure that the seatback position is not stored in the fold seat control ECU or reclining motor.

-

If initialization has been completed, initialization cannot be performed. If initialization is required, erase the initialization before starting initialization.

-

If initialization has not been completed, the 3RD SEAT indicator in the meter will come on regardless of the positions of the seatback and the seat leg.

-

If initialization has been erased or performed, turn the ignition switch on (IG) and check the condition of the 3RD SEAT indicator in the meter.




a.
B401726E01
0.064,0.073 1.226,0.390 1.162,0.317 10 Power Rear Seat Switch 2.925,1.265 2.925,0.857 false 2.495,1.904 2.495,1.496 false 2.223,1.924 2.793,2.064 0.570,0.140 10 Forward 2.501,0.596 3.150,0.737 0.649,0.141 10 Backward

Press and hold the power rear seat switch until the seat is completely folded down.


b.

Continue pressing the power rear seat switch for another 1 second with the seat folded down. Initialization is complete and the buzzer sounds.



INITIALIZATION ERASE PROCEDURE


HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.

·

Before starting the following procedure, make sure that the seatback position is stored in the fold seat control ECU and reclining motor (the seatback position is initialized).



a.
B401725E03
0.836,0.059 2.277,0.200 1.441,0.141 10 FOLD SEAT SWITCH 0.269,0.989 1.494,1.144 1.225,0.155 10 FOLDING SWITCH 0.092,1.49 1.508,1.826 1.415,0.335 10 STOWING / RETURN SWITCH (RETURN) 2.347,1.357 2.073,1.083 2.073,1.083 1.811,1.083 false 2.415,1.865 2.141,1.59 2.141,1.59 1.879,1.59 false 2.441,2.092 2.11,2.496 2.11,2.496 1.932,2.496 false 0.221,2.393 1.636,2.728 1.415,0.335 10 STOWING / RETURN SWITCH (STOWING)

Press and hold the stowing / return switch (RETURN).


b.

Within 10 seconds, press the folding switch 5 times while holding the stowing / return switch (RETURN).

HINT:
·

Do not release the stowing / return switch (RETURN) until 10 seconds have elapsed.

·

Pressing the folding switch 6 times or more with the return switch held down disables the initialization erase operation.