72997
1.REMOVE REAR SEATBACK COVER LH
Remove the 2 screws.
Detach the 2 claws and remove the cover.
72996
2.REMOVE REAR SEATBACK COVER RH
Remove the 2 screws.
Detach the 2 claws and remove the cover.
71844A
3.REMOVE REAR NO. 2 SEAT RECLINING COVER LH
Remove the 2 screws.
Using a screwdriver, detach the 8 claws.
Tape the screwdriver tip before use.
Detach the 2 claws and remove the cover.
73540C
4.REMOVE REAR NO. 2 SEAT LAP TYPE BELT ASSEMBLY
71843A
5.REMOVE REAR NO. 2 SEAT RECLINING COVER RH
Remove the 2 screws.
Using a screwdriver, detach the 8 claws and remove the cover.
Tape the screwdriver tip before use.
79021
6.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH
Using a screwdriver, detach the hooks.
Remove the 9 screws and under carpet.
Remove the 2 nuts and belts.
Remove the seat cushion cover (with pad) from the seat cushion spring.
Fabric Seat (Low Grade)
Remove the 18 hog rings and seat cushion cover from the seat cushion pad.
Fabric Seat (High Grade), Leather Seat
Remove the 17 hog rings.
Open the fastening tape and seat cushion cover from the seat cushion pad.
71940E
7.REMOVE NO. 2 SEAT HEADREST ASSEMBLY
71960B
8.REMOVE REAR SEAT HEADREST ASSEMBLY CENTER
72679
9.REMOVE REAR SEATBACK LOCK CONTROL BEZEL
Remove the 2 screws.
Detach the claw and remove the bezel.
79023
10.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH
Detach each of the 3 hooks as shown in the illustration.
Open the lower part of the seatback cover. Then remove the 5 hog rings.
Open the 2 zippers.
Remove the 2 nuts and center armrest.
Remove the nut and release handle.
Detach the 8 claws and remove the 4 headrest supports.
Remove the seatback cover (with pad) from the seat frame.
Fabric Seat (Low Grade)
Remove the 7 hog rings and seatback cover from the seatback pad.
Fabric Seat (High Grade) , Leather Seat
Remove the 13 hog rings and seatback cover from the seatback pad.
72551E
11.REMOVE RECLINING HINGE COVER LH
Remove the screw and hinge cover.
72551B
12.REMOVE RECLINING HINGE COVER RH
Remove the screw.
Detach the claw and remove the hinge cover.
71694D
13.REMOVE REAR SEAT CUSHION HINGE COVER OUTER LH
Remove the 2 screws and hinge cover.
71693C
14.REMOVE REAR SEAT CUSHION HINGE COVER OUTER RH
Remove the 2 screws and hinge cover.
79203A
15.REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH
Disconnect the cable from the seat cushion spring as shown in the illustration.
Remove the 4 bolts and seatback frame.
72507D
16.REMOVE NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY
Remove the 2 nuts and 2 release handles.
72570C
17.REMOVE NO. 2 SEAT RECLINING ADJUSTING CABLE ASSEMBLY RH
Cut and remove the 4 cable ties.
Remove the reclining adjusting cable from the seatback as shown in the illustration.
71695E
18.REMOVE REAR NO. 2 SEAT PROTECTOR
Remove the tape.
Remove the 3 seat protectors.