Home › Vehicle Interior › SEAT › SEAT HEATER SWITCH
RM24M0E _58 Vehicle Interior _059567 SEAT _0292003 SEAT HEATER SWITCH G

SEAT  SEAT HEATER SWITCH  INSPECTION  


PROCEDURE

Hide 84751 1.INSPECT SEAT HEATER SWITCH

a.
B131373E02
2.635,1.271 2.802,0.667 false 2.49,1.281 2.344,0.667 false 2.75,1.344 2.823,1.563 false 2.375,1.344 2.333,1.635 false 2.25,1.635 2.49,1.792 0.24,0.156 10 false LH 2.719,1.625 2.948,1.802 0.229,0.177 10 false RH 2.208,0.438 2.49,0.635 0.281,0.198 10 false IG 2.698,0.417 2.969,0.625 0.271,0.208 10 false IG

Measure the resistance of the seat heater switch when the switch is operated.

Standard resistance:
for LH
Tester Connection Switch Condition Specified Condition
5 (IG) - 6 (LH) ON Below 1 Ω
5 (IG) - 6 (LH) OFF 10 kΩ or higher

for RH
Tester Connection Switch Condition Specified Condition
4 (IG) - 3 (RH) ON Below 1 Ω
4 (IG) - 3 (RH) OFF 10 kΩ or higher


If the result is not as specified, replace the switch.


b.
B131375E02
2.854,1.354 2.854,1.583 false 2.615,1.281 2.823,0.698 false 2.49,1.271 2.375,0.688 false 2.729,0.5 2.969,0.677 0.24,0.177 10 false IG 2.292,0.49 2.531,0.667 0.24,0.177 10 false IG 2.781,1.594 3,1.771 0.219,0.177 10 false E

Check that the seat heater switch indicator light illuminates when the switch is operated.

OK:
for LH
Measurement Condition Switch Condition Specified Condition
Battery positive (+) → 5 (IG)
Battery negative (-) → 2 (E)
ON Illuminates

for RH
Measurement Condition Switch Condition Specified Condition
Battery positive (+) → 4 (IG)
Battery negative (-) → 2 (E)
ON Illuminates


If the result is not as specified, replace the switch.


c.
B131374

Check that the seat heater switch illuminates.

OK:
Measurement Condition Switch Condition Specified Condition
Battery positive (+) → 7
Battery negative (-) → 8
Always Illuminates


If the result is not as specified, replace the switch.